Tag Archives: valve

Valves for casting defects inevitable or preventable

Valves for casting defects inevitable or preventable

A casting defect is an undesired anomaly in the process of metal casting. Some errors are tolerable or repairable. Otherwise, such mistakes must be rejected. Casting defects are broken down into five main categories: gas porosity, shrinkage defects, mold material defects, pouring metal defects, and metallurgical defects

Valves casting defects are inevitable conditions associated with the process, and it is tolerable as long as it does not affect the final quality of the product. Under practical circumstances, castings may contain imperfections such as voids or inclusions and are subjects of normal quality variation. In other words, the casting process is never devoid of mistakes, errors, and imperfections, this is why the quality assurance and product inspection activities will need to verify the tolerable degree of each defect and decide whether to accept or reject.

Valve Castings is a big headache for fitting and piping players, and this has been recurring phenomenon in the over 6000 thousand years old industry. For the manufacturer to get top quality valve castings done, all hands must be on deck to https://www.kp-lok.com achieve the best casting output. This amounts to a need for more control in the process of casting to produce less defective valves.

The general origins of defects lie in three sectors.

  1. The casting design.
  2. The manufacturing technique —the method,
  3. The application of the method – ‘workmanship.’

A defect may arise from a single clearly defined cause which enables the remedy to be sought in one of these sectors. It may result from multiple factors so that the necessary preventive measures are more obscure. All foundrymen are familiar with the persistent defect which defies explanation and disappears without proof of the real problem. Close monitoring and standardization of every aspect of manufacturing technique offer the best defense against such troubles.

Although the logical classification of casting defects presents great difficulties because of the extent of the contributing causes, a rough classification may include grouping the defects under certain broad types:

  1. Shaping faults arising in pouring.
  2. Inclusions and sand defects.
  3. Gas defects.
  4. Shrinkage defects due to volume contraction in the liquid state and during solidification.
  5. Contraction defects are occurring mainly or wholly after the cast solidify.
  6. Dimensional errors.
  7. Compositional errors and segregation.

Preventing valve casting defects

It is upon the valve manufacturer to work with the foundry to ensure quality castings are produced. Through the process of testing and quality inspection, both the end user and valve manufacturers have a job to do in working together to achieve better valve product. They can accomplish this by sharing casting process expertise and working closely with the foundry; valve manufacturers produce top quality casting that will be less defective. In achieving this, there is need to take a second look at causes of defects and put in place the right system to correct them. When the mold design and the right materials are used under the right atmosphere, there is a guarantee of a better casting process that will produce high-quality valve casting. When the method is correct and the material is put together under the right atmosphere and knowledge, a better result for the cast can be guaranteed.

Valves for casting defects inevitable or preventable

Valve casting defects are inevitable because of many contributory factors that result in faulty output. For a fluid flow control product, it must be completely sealed to maintain air-tight control in the high-pressure piping system. As long as the valve casting meets this required expectation of high sealing efficiency, the product can be used.

Read More »